Вибери країну доставки

Moondrop ECHO-A Silver Hi-Fi DAC & ADC Інтерфейс

Код товару: 1329409

Moondrop ECHO-A Silver Hi-Fi DAC & ADC Інтерфейс

Код товару: 1329409

The Moondrop ECHO-A is a pocket-sized USB-C portable DAC/AMP that brings high-resolution audio to any device with a USB-C output. Built around a dedicated audio SoC chip, it delivers hardware-level decoding up to 32-bit/384kHz through a standard 3.5mm headphone jack. The lightweight dongle design plugs straight into phones, laptops, tablets, and…

Moondrop ECHO-A Silver Hi-Fi DAC & ADC Інтерфейс

The Moondrop ECHO-A is a pocket-sized USB-C portable DAC/AMP that brings high-resolution audio to any device with a USB-C output. Built around a dedicated audio SoC chip, it delivers hardware-level decoding up to 32-bit/384kHz through a standard 3.5mm headphone jack. The lightweight dongle design plugs straight into phones, laptops, tablets, and gaming handhelds with no drivers required.

  • High-Resolution Decoding: Hardware-level 32-bit/384kHz PCM audio processing for studio-grade playback from any USB-C source.
  • Integrated DAC and Headphone Amplifier: A single SoC chip handles decoding, DSP, and amplification for clean, low-noise sound on the go.
  • 3.5mm Output with Microphone Pass-Through: OMTP-standard 4-pin jack supports both headphones and inline-mic headsets for calls and gaming.
  • Plug-and-Play Across Platforms: UAC 2.0 protocol works with Windows PCs, Macs, Android phones, iPhones, and iPads without extra drivers.
Ще не створено іншого опису твоєю мовою. Можливо, тобі зараз допоможе опис англійською мовою.

Portable DAC/AMP for High-Resolution Sound Anywhere

The Moondrop ECHO-A is a high-resolution portable DAC/AMP that turns any USB-C device into a serious music source. Plug it into a smartphone, laptop, or tablet and the dongle takes over decoding and amplification, replacing the often mediocre output of built-in audio circuitry. Hardware-level processing handles PCM streams up to 32-bit/384kHz, so high-resolution tracks play back with the detail and dynamic range the files were mastered for. This dongle is the right choice for listeners who want a clean, low-noise upgrade to mobile audio without carrying a desktop stack.

What Sets the ECHO-A Apart

At the heart sits a dedicated audio SoC that integrates a CPU, RAM, DSP, and decoding amplifier on a single chip — a level of integration rarely seen at this price tier. The 3.5mm output is a 4-pin OMTP-standard jack, carrying both the headphone signal and an online-controlled microphone line for headsets with inline mics. Running over the UAC 2.0 protocol means no drivers, apps, or firmware updates are needed across Windows, macOS, Android, and iOS.

Technical Performance That Matters

Measured figures put this dongle comfortably in audiophile territory, with headroom to drive sensitive in-ear monitors without adding hiss to the background.

  • Sample Rate / Bit Depth: 384 kHz / 32 bit — hardware-level decoding for lossless and high-resolution PCM files.
  • Signal-to-Noise Ratio: 100 dB (A-weighted) — clean output that stays quiet even with sensitive IEMs.
  • Dynamic Range: 102 dB (A-weighted) — preserves the contrast between quiet and loud passages in well-mastered music.
  • THD+N: 0.01% (AES17, 20 kHz, no-load) — vanishingly low distortion so the amplifier adds nothing of its own to the signal.
  • Output Jack — a 3.5mm 4-Pin (SE + MIC / OMTP) socket that carries both the headphone signal and an online-controlled microphone line for headsets with inline mics.

Who Should Pick Up the ECHO-A

This dongle is built for listeners who already own good headphones or in-ear monitors and want to unlock their potential from a phone or laptop. It suits commuters, students, and remote workers who need a discreet upgrade that slips into a pocket without adding weight. Casual gamers benefit from the OMTP microphone pass-through, which keeps a headset's inline mic working for voice chat on mobile and desktop. Anyone whose device has dropped the headphone jack — or whose built-in output sounds flat and noisy — will hear an immediate improvement in clarity, bass control, and overall musicality.

Мета використання

Тип

DA конвертер, Підсилювач для навушників

Сумісність

Android, Apple, Windows, iOS

Функції

DA конвертер

Так

Кількість каналів

2

THD

0,01%

ADAT

Ні

Bluetooth

Ні

Wi-Fi

Ні

Особливості

Частота вибірки

384 kHz / 32 bit

AES / EBU

Ні

Співвідношення сигнал/шум

100 dB

колір

Срібний

Входи та виходи

S/PDIF

Ні

Ethernet

Ні

Аналогові входи

Ні

Вихід для навушників

Так

Вхідні дані

USB-C

USB

Так

Блок живлення

Працює на батареї

Ні

Блок живлення

USB-C

Країна

Країна походження

Китай

Документи

Інструкції з використання
Інструкції з техніки безпеки

Будь ласка, звернися до посібника користувача, щоб отримати конкретні інструкції з техніки безпеки для цього виробу